Whatever it is, the way you tell your story online can make all the difference.
DASAN ZHONE SOLUTIONS
Mobile Solutions
MPLS Based Backhaul
M2400
M2400 is a 1U-high chassis with three optional slots and is optimized for efficient network expansion with mobile backhaul access / aggregation Cell Site Router (CSR).
With four 10 Gigabit Ethernet ports (SFP +, fixed) and three optional slots, users can use uplinks or downlinks with various options depending on the network environment.
2 ports of 10GBase-R (SFP +), 8 ports of 100 / 1000Base-T (RJ45), 8 ports of 100 / 1000Base-X (SFP) or CWDM filters (LC)
The M2400 supports the front service port interface and has a power section at the rear. The M2400 provides two power supply units (PSUs) on the back. The power supply can be equipped with a module type DC or AC power module. In addition, power supply redundancy ensures the stability of the equipment.
Call for pricing
M3000
M3000 is a cost -effective carrier Ethernet switch to support the packet -based transport technology that is based upon circuit -based transport networking. It has been designed for mobile backhaul networks with demanding subscriber bandwidth requirements and rigid quality-of -service and security needs. The M3000 can be used for a variety of new, revenue -generating applications, for example as L 2/L 3 Ethernet LAN switches in high rise buildings or as datacenter application and aggregation switches . Additionally, M3000 switch helps to enhance network efficiency through offering dedicated L 3 functionality. The M3000 is a front access switch that the interface connections are located on the front of the single -board. The M3000 is comprised of 24 -Port 1GE (SFP) or 10GbE (SFP+) or 25GE (SFP28 ) interfaces and 4 -port 40GbE (QSFP+) or 100GbE (QSFP28 ) interfaces.
10GbE or 25GbE interfaces can be used as downlink towards the user network and 40GbE or 100GbE interfaces can be used either to cascade other switches or to connect to a core network devices. Also, The M3000 provides 2 mounting slots for the dual power modules and 2 mounting slots for the fan on the rare panel. PSU modules support 1:1 redundancy and load sharing, so it is possible to operate with non -stoppable. Regarding to FAN operation, it is controlled by internal CPU block, so fan speed is controlled based on internal system temperature . The MGMT and console interface is also located on the front panel with embedded LED for L/A SPD and TX/RX indication respectively. They are for use of equipment management via remote access or CLI.
Call for pricing
Ethernet Switch Solution
L3 Ethernet Switch
V6848XG
V6848XG is 10GbE switch specifically designed to handle demanding network requirements for the data center with low latency. It enables 10GbE to be deployed in the data center, which can significantly improve server utilization and consequently data center power efficiency.
The V6848XG offers 48 10 Gigabit Ethernet ports (SFP+ /SFP). All 10GbE ports allow the maximum flexibility. This switch provides high-bandwidth switching, filtering, and traffic management without delaying data, and large data center grade buffers to keep traffic moving.
The V6848XG will support Dual PSU(Power Supply Unit) module for non-stop power assurance for your network, and Dual FAN module for cooling system to make your system work with excellent performance. The V6848XG is ready for the Software-Defined Network (SDN) with OpenFlow 1.0/1.3 support.
Call for pricing
V6824XG
V6824XG is 10GbE switch specifically designed to handle demanding network requirements for low latency network such as data center and for ISP’s FTTx broadband aggregation network .
It enables 10GbE to be deployed in the network, which can significantly improve server utilization and consequently data center power efficiency. The V6824XG offers 24 10 Gigabit Ethernet ports (SFP+ /SFP). All 10GbE ports allow the maximum flexibility. This switch provides high-bandwidth switching, filtering, and traffic management without delaying data, and large data center grade buffers to keep traffic moving.
The V6824XG will support Dual PSU(Power Supply Unit) module for non-stop power assurance for your network, and Dual FAN module for cooling system to make your system work with excellent performance.
Call for pricing
V5648G
V5648G is an enterprise-class standalone switch with 1U form factor for data center, campus and branch office environments.
This switch offers 48 1Gigabit Ethernet ports (RJ45) and provides high-bandwidth switching, filtering, and traffic management without delaying data.
V5648G include LLDP (Link Layer Discovery Protocol) which allows for troubleshooting and enhanced network management over multi-vendor environments, as well as LLDP-MED and DHCP Snooping to further expand network security.
V5648G provides 2 PSU (Power Supply Unit) slots that AC power module can be mounted.
This ensures equipment-level reliability with power module redundancy architecture.
Call for pricing
V5624G
V5624G is an enterprise-class standalone switch with 1U form factor for data center, campus and branch office environments. This switch offers 24 1Gigabit Ethernet ports (RJ-45/SFP) and provides high-bandwidth switching, filtering, and traffic management without delaying data.
V5624G include LLDP (Link Layer Discovery Protocol) which allows for troubleshooting and enhanced network management over multi-vendor environments, as well as LLDP-MED and DHCP Snooping to further expand network security.
V5624G provides 2 PSU (Power Supply Unit) slots that AC power module can be mounted. This ensures equipment-level reliability with power module redundancy architecture.
Call for pricing